1、陶瓷生产机械转运平台欧盟CE知识分享指令

MD机械指令：2006/42/EC

2、陶瓷生产机械转运平台欧盟CE知识分享标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN 13367:2005+A1:2008/AC:2009 Ceramic machines - Safety - Transfer platforms and cars陶瓷机械.安全.转移平台和汽车

3、EN 13367:2005+A1:2008/AC:2009适用范围：

1.1 This European Standard applies for the design, installation and commissioning of transfer platforms and cars and ancillary devices for the process related transport of ceramic material on rails. The rails, which are considered to be horizontal and the movement of vehicles in equipment and machinery connected with the process related transport such as kilns, dryers, collector scaffolds, machinery for loading and unloading are also covered.

1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to transfer platforms and cars, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Noise is not a significant hazard. This document deals with the preventive measures to minimise these hazards which can arise during commissioning, the operation and maintenance.

1.3 This European Standard is not applicable to:

1.3.1 Kilns and dryers (see EN 746-1:1997), machinery for setting and dehacking of heavy clay and refractory, products and machinery for loading and unloading of fine clay tiles;

1.3.2 Retrial, packaging and storage of finished products;

1.3.3 Transport of cars with not rail mounted equipment e.g., with driverless trucks (see EN 1525:1997);

1.3.4 Transfer platforms and cars which are driven by human power.

1.4 This European Standard is not applicable to transfer platforms and cars and ancillary devices which are manufactured before the date of publication of this European Standard by CEN.

1.1本欧洲标准适用于轨道上陶瓷材料工艺相关运输的转运平台、车厢和辅助设备的设计、安装和调试。轨道被认为是水平的，与工艺相关运输相关的设备和机械（如窑炉、烘干机、收集器脚手架、装卸机械）中的车辆运动也包括在内。

1.2本欧洲标准涉及与转移平台和车辆相关的所有重大危险、危险情况和事件，当它们按预期使用并在制造商预见的条件下使用时（见第4条）。噪音不是重大危险。本文件涉及预防措施，以最大限度地减少调试、运行和维护过程中可能出现的这些危险。

1.3本欧洲标准不适用于：

1.3.1窑炉和干燥机（见EN 746-1:1997），重粘土和耐火材料的固化和脱包机械，精细粘土砖的陶瓷生产机械转运平台和装卸机械；

1.3.2成品的复验、包装和储存；

1.3.3使用非轨道安装设备的汽车运输，例如使用无人驾驶卡车（见EN 1525:1997）；

1.3.4由人力驱动的转运平台和车辆。

1.4本欧洲标准不适用于CEN发布本欧洲标准之前制造的转移平台、车辆和辅助设备。